• Watse Tire Recycling Debeader Tire Wire Drawing Machine

Watse Tire Recycling Debeader Tire Wire Drawing Machine

  • Product Description
  • Technical Parameters
  • Video

Tire Wire Drawing Machine Description:
WANROOETECH supplies tire recycling production lineTire powder pulverizer mill for sale. At the same time, we also have professional pre-treatment machines and devices for tyre processing, such as tyre shredder, to make the pyrolysis process much easier. Before the tyre being shredded into pieces, we will need the help of a tyre wire drawing machine to get the bead wires out from the inside of the tyres.
WANROOETECH hydraulic tyre tire wire drawing machine can pull the bead wires inside of the tyres out completely for one time. It can make the following processing of waste tyres including shredding or cutting and the pyrolysis process much easier. The main parts of tire wire drawing machine is an electromotor oil pump, hook, four-bladed vane, rack, oil cylinder, hydraulic pressure stands, control handle, guide pulley, etc.

Wire Drawing Process of Waste Tires:
Firstly, the hook is driven by a hydraulic system and stretches into the waste tyres. Secondly, press the start button and then the steel wire will be pulled out by the hook under a strong power of pull. At the same time, rubbers will be stripped away from the wires. Because the pulling port can prevent rubbers from going out, finally we can get clean wires and the whole pulling procedure is fairly smooth. And then the tyres will be sent to the shredder and wait for shredding. The steel wires can be collected and used as raw materials for producing steel bloom by hydraulic press-packing.
Tyre steel wire pulling drawing machine and tyre shredder are always utilized together as an integrated pre-treatment system for waste tyre recycling. If the tyre diameter exceeding 1200 mm, you will need a jaw cutter and a larger wire drawing machine. Wanrooetech also provides tire wire drawing machines to treat tyres with a diameter more than 1200 mm and you can email us for more information about the tire wire drawing machine.

tire wire drawing machine,tire debeader, tire bead steel wire remover, tire wire removal machine

Tire Wire Drawing Machine Features :
1. Compact structure. This equipment is not so big and covers a maximum area of about 5 ㎡, so it is easy to handle and can save a lot of space for the clients.
2. High efficiency. The largest capacity per hour of this machine can reach 120 pieces of waste tyres and it is very competitive on the market of like products.
3. Safety design. This tyre steel wire pulling machine has protective rack and it can protect the operator from hurting by the sharp head of the steel wire.
4.  Easy to Operate. Wanrooetech tyre wire drawing machines are fully automatic. The whole processing of the tire wire drawing machine is automatic. The operator only needs to know how to operate the control system.
5. Smooth and complete separation of steel wire and rubber tires. We make sure you get clean steel wires from the tyres without any rubbers or impurities stuck on them.

Watse Tire Recycling Debeader Tire Wire Drawing Machine


Leave a Reply

Your email address will not be published. Required fields are marked *

Model PNLS1200
Capacity 20-40pcs/hour
Tyre Size 1200mm
Power 11Kw
Weight 1500kg
DimensionL*W*H 4100*1300*1750mm