• PVC Ground Mat Shredder, Carpet Shredder, Mat Shredder, Plastic Floor Shredder, PVC Ground Mat Recycling, Yoga Mat Shredder

Waste Plastic PVC Ground Mat Carpet Floor Shredding Machine

PVC mats are plastic non-slip mats, also known as carpet anti-slip mats. PVC mats are non-toxic. This rug has good anti-skid performance, is also very convenient to clean, and does not accumulate water. It can dry in a timely manner. It will also be used frequently in places. The recycling of waste PVC carpet has great value. Use a shredder to shred the PVC carpet, then use the shredder to break it into particles, and then grind it into powder to make a new PVC carpet.

  • Product Description
  • Technical Parameters
  • Video

Application Areas:
PVC ground mat shredder machine can shred waste PVC ground mat, PVC floor, plastic floor, carpet, mat, PVC carpet, PVC mat, floor, PVC Coil Mat, Yoga Mat,Bathroom mat, sponge mats, high jump mats, standing long jump mats, gymnastic mats, take-off mats, hand-held mats, yoga mats, dance mats,etc .

Description:
Single shaft shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small size. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper etc. The cutter head is consists of basic shaft and pieces of quadrangle cutter. There are four edges which are easy to change. ‘V’ shaped rotary cutters are fixed on single shaft. The fixed cutter is mounted at an angle in adjacent to rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reducing of noise are ensured by the installation of ‘V’ shape rotor knives. Also the knives are very easy to install and remove.

Single Shaft Shredder ‘V’ shaped blade:

single shaft shredder blade
Working principle:
The motor drives the shaft to make knife rotates in high speed, the material are put to between the knife shaft and fixed knife, the materials are shredder, the qualified size will discharge from the screen mesh, the oversize material will be send back for re shredding. The final product size can be adjusted by changing the final product size.

Components:

Single Shaft Shredder Components
Technical Features:
1. The shredder single shaft for plastic with big feeding mouth, it can put the big plastic or rubber product freely.
2. The rotary and cutting blade with edge of special design, it can get very high efficiency and high capacity.
3. The shredder single shaft for plastic is control by PLC system; the blade can rotate inopposite direction and close automatically if something unexpected happens; with very high safety service.
4. The shredder single shaft for plastic runs slowly with low noise and less dusty.
5. The blade material with special alloy steel made, with long life.
6. All the machinery and electrical devices are protected in accordance with the European CE standard.
7. Hydraulic system Pushes the material automatically to the shredding rotor while working. More efficient and can achieve a high capacity. According to material kind, can adjust the pushing speed to avoid overload.
8. Cooler system(optional) can maintain the temperature for continuous operation.

Relative Equipment:

 

single shaft shredder, plastic shredder, plastic pipe shredder, wood shredder, cable shredder

Model PNDS-600A PNDS-800A PNDS-1000A PNDS-1200A PNDS-1500A
Dimension L*W*H(mm) 2455×1478×1700 2825×1747×1875 2825×2004×1875 2825×2564×1875 2825×2964×1935
Cutting Chamber C/D(mm) 1200×600 1410×800 1410×1000 1410×1200 1410×1500
Main Powerkw) 15-22 30-45 37-55 55-90 75-132
Hydraulic Power(kw) 2,2 3 4 5.5 5.5
Shredding Diameter(mm) 320 400 400 400 480
Shredding Rotor Length(mm) 600 800 1000 1200 1500
Rotating&Fixing Blades QTY(psc) 32+2×2 38+2×2 58+2×2 95+2×3 110+2×3
End Plastic Scraps Size(mm) 30-50 30-50 30-50 30-50 30-50

Video

Products List