Used WPC SPC PVC Plastic Floor Shredder Machine Application Areas:
Floor shredder machine is a swing arm type single shaft shredder. Floor shredder machines can shred waste SPC floors, PVC floors, plastic floors, WPC floors, wood floors.

Used WPC SPC PVC Plastic Floor Shredder Machine Description:

Plastic Floor Shredder Machine is a heavy-duty size reduction machine suitable for processing a wide variety of materials including large volume of plastic, paper, cardboard, wood, textile, etc.
Different from traditional single shaft shredder which is equipped with a horizontal hydraulic pusher, this swing arm type single rotor shredder adopts a hydraulic-driven swing pusher that automatically forces material towards the cutting rotor for achieving the most efficient size reduction performance.

A replaceable screen is mounted underneath the cutting rotor for controlling the shredded material below the screen mesh size. The rotary cutter features with auto reverse function which kicks in anytime in case of some stubborn material or excessive quantities of material that cannot be shredded. This automatic reverse function not only protects the machine itself from overloading and breaking but also guarantees a continuous and streamlined shredding operation. Controlled by a PLC system, the operation of this single-rotor shredding machine is straightforward, simply press buttons on the control panel to control every movement. And “auto mode” can be available for automatic operation to increase working efficiency and meanwhile save labor.

Single Shaft Shredder ‘V’ shaped blade:

Used WPC SPC PVC Plastic Floor Shredder Machine Working principle:
The motor drives the shaft to make the knife rotates at high speed, the material is put between the knife shaft and the fixed knife, the materials are shredder, the qualified size will discharge from the screen mesh, the oversize material will be sent back for re-shredding. The final product size can be adjusted by changing the final product size.

Used WPC SPC PVC Plastic Floor Shredder Machine Component:

Hydraulic-driven swing pusher To push the objects close to the rotary cutters to achieve efficient shredding performance	Heat treated rotor knives Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design with staggered cutter positioning	Wear Resistant Tungsten surface coating for abrasive applications
Easy operation Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation	Replaceable screen at the outlet For controlling the output granules below certain size. Size of the screen mesh can be customized according to your need
PLC control Making it easier for fault diagnosis and maintenance	Hydraulic System The pressure and rate of flow can be adjusted according to different materials.

Used WPC SPC PVC Plastic Floor Shredder Machine Technical Features:
1. The shredder single shaft for plastic with a big feeding mouth, it can put the big plastic or rubber product freely.
2. The rotary and cutting blade with edge of a special design, can get very high efficiency and high capacity.
3. The shredder single shaft for plastic is controlled by PLC system; the blade can rotate in opposite direction and close automatically if something unexpected happens; with very high safety service.
4. The shredder single shaft for plastic runs slowly with low noise and is less dusty.
5. The blade material with special alloy steel made, with long life.
6. All the machinery and electrical devices are protected in accordance with the European CE standard.
7. Hydraulic system Pushes the material automatically to the shredding rotor while working. More efficient and can achieve a high capacity. According to material kind, can adjust the pushing speed to avoid overload.
8. Cooler system(optional) can maintain the temperature for continuous operation.

Relative Equipment：

SPC Floor Recycling Line
SPC Vinyl Flooring Crusher Granlator Machine

Video