• Aluminum Can Shredder, Oil Filters Shredder, Metal shredder, Aluminum Profile Shredder, Oil Drum Shredder, Beer Can Shredder

Scrap Metal Steel Oil Drum Aluminum Can Profile Recycling Shredder

Scrap Metal  shredder is suitable for kinds of metal scraps, such as scrap metal cans, beverage cans, beer cans, red bull cans, metal bottles, cans, cola cans, paint buckets, iron buckets scrap tin cans, scrap iron slag, moon cake boxes, steel shavings, scrap aluminum cans, scrapped automobile scrap, waste water tanks, waste radiators, metal drum, metal barrel, car airbag metal, tin cans and etc.

  • Product Description
  • Technical Parameters
  • Video

Applications:
Scrap metal steel materials: such as scrap steel pipes, steel plates, scrap iron wires, scrap steel, scrap steel, steel furniture, etc.
Oil drums: various waste gasoline drums, iron cans, thin iron sheets, waste cans, etc.
Aluminum products: scrap aluminum cans, scrap aluminum frames, aluminum profiles, etc.
Steel Drum Shredder, Paint Bucket Shredder, Metal Shredder, Scrap Metal Shredder, Steel Pails Shredder
Description:
Metal drum, which is valuable metals, when they are not recycled, it would take hundreds of years for them to break down in the landfill, to save energy and improve a healthy environment, it’s better to reuse these valuable materials. The most efficient and economical method is to shred them into small strips, remelt them and reuse them again.
WANROOETECH  provides the whole system for recycling metal drums, the metal drums would be put into double shaft shredder for rough shredding first, the shredded metal strips from double shaft shredder will be transferred to hammer shredder to crush again, in the end, you’ll get dense metal, during this procedure, part of the paintings on the metal drum would be separated. The dense metal with its small size is convenient for transportation.

Scrap Metal Steel Oil Drum Aluminum Can Profile Shredder Blade:

Double Shaft Shredder Blades
Components:

double shaft shredder chassis Shredder Spindle
Shredder Chassis
The whole chassis is made of welded steel plate and finely machined by CNC gantry milling, which has high bearing capacity, high impact resistance and more stable quality.
Shredder Spindle
The shredder spindle is made of high alloy, forged and heat-treated and tempered as a whole, and then machined into hexagonal, octagonal and spline form by CNC gantry milling after fine turning, with long service life.
double shaft shredder blade Segmented Blades
Shredder Blade
The shredder blade is made of special steel, forged, faded, refined, vacuum heat treatment, computerized wire cutting, CNC grinding machine processing.
Segmented Blades
The segmented blade design can greatly reduce the blade changing time and cost. The blade comprises of the blade holder, and two types of blade segments, with and without hooks. Worn blade segments can quickly and easily be removed and replaced by simply removing the securing screws.
motor Planetary Reducer
Motor
The motor adopts Siemens, Wanan and other domestic brands of pure copper motor, with stable and reliable quality, and can be customized according to requirements.
Planetary Reducer
The reducer chassis adopts welded box, helical gear, planetary gear transmission, with small volume, low noise, high torque and other characteristics, higher transmission efficiency.
double shaft shredder electronic control conveyor belt
Electronic Control
The whole model adopts frequency conversion control and conforms to international standards such as CE/CSA.
Belt Conveyor(optional)
The waste is conveyed into the shredder through the belt feeding device, and the speed of the conveyor belt is automatically adjusted according to the current of the shredder.
Hydraulic Force Feeder Rotary Screen
Hydraulic Force Feeder(optional)
A hydraulic force feeder is available to actively press the input material down into the cutting zone between the two shearing shafts. This holding action prevents material from riding over the blade hooks, thus greatly improving the cutting efficiency and throughput of the machine.
Rotary Screen(optional)
To effectively control the output product size, a circular screen mounted around the cutting chamber is the ideal solution.The rotary screen runs at low speed, and the oversized fractions are recirculated back to the cutting chamber for further shredding, whilst the sized fraction falls through the screen to the next process.

Features:
1.Our shredders can be employed as either a primary or secondary shredder and can be seen working anywhere from the waste management company to biofuel producers;
2.Dual shafted, slow-speed, high-torque waste shredder with hardened steel cutters;
3.The two cutting rotors powerfully grab the feed material, and no matter the feed material is large piece of hard plastic or heavy tires, this machine can easily shred them into small pieces;
4.Double shaft shredder is able to process a number of different materials; shredder is designed with a powerful engine, long working length and aggressive input, Internal feeding volume bigger than traditional and common single shaft shredder machine and allow you using forklift truck to feed.
5.Heavy structure: the frame and structure of our shredders are made of high-thickness sheets and tubular. Blades are manufactured from high quality steel, suitable for shredding tough materials and for extra long life;
6.Depending on requirement, these discs (blades) are available in a wide range of quantities, qualities and shapes with the new double-shaft shredder;
7.Any overloads caused by foreign material are sensed by the PLC controller and cause the shaft rotation to stop and reverse direction to clear the foreign matter, and then resume;
8.Cutters removal and replacement can be carried out safely and simply.
9.Our shredders Use a planetary reducer, not a traditional gearbox, and the planetary gearbox has the following advantages: High Efficiency, Greater Stability, Compact Size, Higher Torque Density, Cost Effective Precision, High Radial Loads.

Leave a Reply

Your email address will not be published. Required fields are marked *

Specification Shredder Motor Power Shredding Chamber Size
PNSS-300 5.5 510×300
PNSS-400 7.5 510×400
PNSS-600 7.5+7.5 510×600
PNSS-800 11+11 600×800
PNSS-1000 18.5+18.5 800×1000
PNSS-1200 30+30/22+22 1000×1200
PNSS-1400 45+45 1400×1200
PNSS-1600 55+55 1600×1200
PNSS-1800 75+75 1800×1400
PNSS-2000 90+90 2000×1400

Video