• Plastic Shredding Machine, Plastic Pipe Shredder, HDPE Shredder, PVC Shredder, Plastic Tube Shredder

PP PE HDPE PVC Plastic Tube Pipe Recycling Shredding Machine

Waste plastic pipes and tubes usually are in long size, so in the recycling process for such products, size reduction is the first step which usually is done by a shredder. Plastic tubes are turned into small scraps after shredding, and those scraps are then put into re-production according to various manufacturing requirements. Usually, the high quality and clean waste plastic is directly made into new plastic raw material

  • Product Description
  • Technical Parameters
  • Video

HDPE PVC Plastic Tube Pipe Recycling Shredder Application:
Plastic Tube Pipe Recycling Shredding Machine is mainly used to grind, crush and recycle lump or block plastics. The shredder machine is suitable for PE, PP, PET, ABS, PVC and engineering plastics.
Commonly Recycled Plastics Include ABS (Acrylonitrile butadiene styrene), PVC(Polyvinyl chlorid),HDPE(High-density polyethylene), LDPE (Low-density polyethylene), PET (Polyethylene terephthalate), PP (Polypropylene), plastic pipe, packaging barrel, plastic pallets and lump, etc.

HDPE PVC Plastic Tube Pipe Recycling Shredder Description:
Single shaft plastic pipe shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small sizes. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper, etc. The cutter head is consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on a single shaft. The fixed cutter is mounted at an angle adjacent to the rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reducing of noise are ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.

Single Shaft Shredder ‘V’ shaped blade:

single shaft shredder blade
HDPE PVC Plastic Tube Pipe Recycling Shredder Working principle:
The motor drives the shaft to make the knife rotate at a high speed, the material is put between the knife shaft and fixed knife, the materials are shredder, the qualified size will discharge from the screen mesh, the oversize material will be sent back for re shredding. The final product size can be adjusted by changing the final product size.

HDPE PVC Plastic Tube Pipe Recycling Shredder Component:

single shaft shredder pusher system Heat treated rotor knives
Pusher System
Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components.
Heat treated rotor knives
Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design Wear Resistant Tungsten surface coating
V-cutting rotor design
with staggered cutter positioning
Wear Resistant
Tungsten surface coating for abrasive applications
Electric Control Cabinet plastic pipe shredder screen unit
Electric Control Cabinet
The whole model adopts frequency conversion control and conforms to international standards such as CE/CSA.
Replaceable screen at the outlet
For controlling the output granules below certain size. Size of the screen mesh can be customized according to your need
PLC control Hydraulic System
PLC Control
Making it easier for fault diagnosis and maintenance
Hydraulic System
The pressure and rate of flow can be adjusted according to different materials.

HDPE PVC Plastic Tube Pipe Recycling Shredder Technical Features:
1. The single shaft plastic tube pipe shredder with the big feeding mouth, can put the big plastic or rubber product freely.
2. The rotary and cutting blade with an edge of special design, can get very high efficiency and high capacity.
3. The shredder single shaft for plastic is controlled by a PLC system; the blade can rotate in opposite direction and close automatically if something unexpected happens; with very high safety service.
4. The single shaft plastic tube pipe shredder runs slowly with low noise and is less dusty.
5. The blade material with special alloy steel made, with long life.
6. All the machinery and electrical devices are protected in accordance with the European CE standard.
7. Hydraulic system Pushes the material automatically to the shredding rotor while working. More efficient and can achieve a high capacity. According to material kind, can adjust the pushing speed to avoid overload.
8. Cooler system(optional) can maintain the temperature for continuous operation.

Related equipment:

Leave a Reply

Your email address will not be published. Required fields are marked *

single shaft shredder, plastic shredder, plastic pipe shredder, wood shredder, cable shredder

Specification PNDS-600A PNDS-800A PNDS-1000A PNDS-1200A PNDS-1500A
Main Powerkw) 15-22 30-45 37-55 55-90 75-132
Hydraulic Power(kw) 2,2 3 4 5.5 5.5
Shredding Diameter(mm) 320 400 400 400 480
Shredding Rotor Length(mm) 600 800 1000 1200 1500
Rotating&Fixing Blades QTY(psc) 32+2×2 38+2×2 58+2×2 95+2×3 110+2×3
End Plastic Scraps Size(mm) 30-50 30-50 30-50 30-50 30-50

Video

Products List