Description:
The metal injection crusher is specially designed and manufactured for metal powder injection molded parts and ceramic powder injection molded parts. It is suitable for crushing and recycling of metal powder injection molded products, defective products, and plastic head materials.

Features of metal powder injection molded parts:
1. The raw materials contain about 85% iron powder, stainless steel powder, alloy powder, or ceramic powder;
2. The product after injection molding has high hardness and strong wear resistance;
3. The nozzles, defective products, and rubber head materials produced by injection molding can be recycled after being crushed.

Requirements for crusher for metal powder injection molded parts:
1.Because the product contains a large amount of metal powder, the product has high hardness and cannot be crushed by ordinary crushers.
2.Because the product contains a large amount of metal powder, the requirements for the grinder cutter are very high, and it must be wear-resistant and impact-resistant.
3.Most of the metallurgical injection molded parts have very high requirements, so the product must not be contaminated during the crushing and recycling process, and the sealing performance of the crusher is high.
4.Because the product contains a large amount of metal powder, dust will be generated during the crushing process. This dust must have a special powder discharge device, otherwise, it will cause serious wear to the running parts of the crusher.

The special crusher for metal powder injection molded parts is designed and manufactured for the metallurgical injection molding industry and has formed a good use in the metal injection molding industry. After a large number of actual use cases, the design is continuously improved to make this model perfect step by step, To make it more suitable for customer needs.

Advantages of metal injection crusher:
1. metal injection crusher is made of special steel, which will not be chipped when crushing and cutting metal parts, and it is durable and wear-resistant;
2. The cleverly designed cutting angle makes the crushing more labor-saving, and the small machine can crush metal products without high horsepower;
3. The particle size of the raw material for metal powder injection molding is generally 0.1-10 µm, so each part of this type of pulverizer has high sealing properties to prevent metal powder from entering the running parts of the machine and causing wear;
4. Since the crushed material is made of high-hardness alloy powder, the material where the crusher is in contact with the material has high abrasion resistance.
5. Holes and grooves for discharging powder are designed in the chassis to prevent dust from entering the bearing.
6. The metal injection crusher has a good appearance and sealing performance, which can effectively prevent the leakage of metal dust during crushing.