• metal shaving oil removing machine, metal chips oil removing machine, metal recycling machine

Metal Shaving Oil Removing Machine

The metal shaving oil removing machine is mainly used for deoiling and drying copper chips, aluminum chips, and iron chips. It is a large-capacity lifting and side-turning self-unloading centrifugal deoiling and drying equipment that has been carefully designed and developed to solve the current market problems. Traditional (basket type and bottom discharging type) equipment has problems such as small loading capacity, cumbersome operation, high noise, and some models cannot unload small and thin parts cleanly, which can easily cause serious defects such as mixing. No need to crush long materials.

  • Product Description
  • Technical Parameters
  • Video

Description:

The metal shaving oil removing machine is mainly used for deoiling and drying copper chips, aluminum chips, and iron chips. It is a large-capacity lifting and side-turning self-unloading centrifugal deoiling and drying equipment that has been carefully designed and developed to solve the current market problems. Traditional (basket type and bottom discharging type) equipment has problems such as small loading capacity, cumbersome operation, high noise, and some models cannot unload small and thin parts cleanly, which can easily cause serious defects such as mixing. No need to crush long materials.

Metal Shaving Oil Removing Machine Application

Main features of metal shaving oil removing machine

It can deoil long and short materials at the same time without crushing, which is currently unachievable by other models.
The metal shaving oil removing machine has stable performance, safety and reliability, high output, good deoiling effect, simple operation and convenient maintenance. It can be operated independently by a single person, which can greatly reduce manual labor intensity and operating frequency, improve the production environment and reduce environmental secondary effects. pollution, improve production efficiency, reduce production costs,
The metal shaving oil removing machine has a novel and beautiful structure, automatic control, and easy maintenance. It is energy-saving and environmentally friendly, and has high cost performance. The entire deliquidating line has a simple process and is controlled by PLC.
The metal shaving oil removing machine is a practical de-oiling machine specially designed for users to de-oil (liquid) various metal chips such as copper chips, aluminum chips, iron chips, etc. It is currently the most ideal de-oiling equipment in the hardware processing industry.

Technical description of loading machine:

Due to the particular length of metal chips, the stability of the machine will be affected when high-speed deoiling is used. When loading, uniform feeding must be considered. In the design process structure, an elevator is used to load and transfer iron chips. Only the trolley (box) is required to be manually moved. Send to the elevator. The lifting system directly lifts the trolley (box) and sends it to the feeding hopper, which is equipped with a vibration motor. All materials enter the deoiling machine after being transported by vibration. This solution is specially designed for deoiling long and short mixed copper scraps. The loading conveyor is equipped with an automatic liquid level device, so that the oil in the conveyor can be automatically pumped into the designated container through the automatic liquid level switch. to prevent oil spills from causing secondary pollution to the workshop environment. The bottom of the deoiling machine has a liquid storage tank and is equipped with an automatic liquid level. The separated oil can be pumped into the designated oil tank regularly.

Process flow:

Manually push the metal chip trolley into the elevator → feed the material evenly into the deoiler through the screw feeding conveyor → run the host at low speed → set the feeding time → the host automatically speeds up → set the forward time → set the reverse time → the host stops → Tipping and dumping → low-speed rotation → unloading ends → entering the collecting box → the oil in the oil tank at the bottom of the deoiler is automatically pumped into the designated container

Metal Shaving Oil Removing Machine  Structure diagram

Main structural indicators​

1. The speed of the deoiling machine shall not be lower than 97% of the design rated speed.
2. The four-legged structure cancels the traditional three-legged suspension structure. It has no foundation installation, reasonable design, novel structure, and easy operation and maintenance.
3. Balanced isolators are used for shock absorption, so that all vibration energy of the deoiling centrifuge is absorbed by the isolators, without any vibration interference to the basic ground and peripheral equipment.
4. The casing and base are welded together, with strong load-bearing capacity, no leakage, and smooth transition of the welds.
5. The bottom and barrel of the drum are connected together with rivets and have undergone strict dynamic balance testing to ensure good balance.
6. The centrifuged filtrate is discharged through the mother liquor outlet, which is located at the bottom of the centrifuge.
7. Made of high-quality steel, the thickness of the drum is 8mm, and the thickness of the shell is 8mm.
8. The spindle has been quenched and tempered to ensure that all data of the spindle meet the national standards of the centrifuge industry. The drum has undergone strict dynamic balance correction to ensure that the whole machine works smoothly and reduces vibration.

Leave a Reply

Your email address will not be published. Required fields are marked *

Metal Shaving Oil Removing Machine Parameters:

Drum diameter: φ1250mm
Drum height: 1100mm
Drum volume: 700L
Maximum loading limit: 500KG (metal chips are calculated by volume)
Drum speed: 580r/min
Production cycle time: 12 minutes per process
Power: 15KW
Feeding method: low-speed vibration feeding
Discharging method: hydraulic automatic dumping
Net oil rate: 95%-97%
Machine weight: 4200kg
Overall dimensions: 2200*2000*1900

Loading machine parameters:

loading machine speed: about 10m/min
Lifting loading capacity: one lift (calculated by volume), the lifting hopper is designed according to the buyer’s standard material box.
loading machine power: 2.2KW
Elevator front bucket vibration device power: 0.55KW

Loading conveyor parameters:

Motor power: 2.2KW
Scraper chain: GB-50.8-375
Scraper sprocket: GBLL-50.8
Scraper casing: Q235
Conveying speed: 10㎜/min