• Drainage Pipe Shredder, Water Pipe Shredder, Pipe Shredder, Plastic Tube Shredder, UPVC Pipe Shredder, PPR Pipe Shredder

Industrial UPVC PPR Water Pipe Plastic Drainage Pipe Shredder

Plastic drainage pipe shredder machine is used to shred UPVC drainage pipe, UPVC water supply pipe, aluminum-plastic composite pipe, polyethylene (PE) water supply pipe, polypropylene PPR hot water pipe, drainage pipe, exhaust and sewage sanitary pipe, underground drainage pipe system, rainwater pipe and wire installation supporting Threading tube, etc.

  • Product Description
  • Technical Parameters
  • Video

Industrial UPVC PPR Pipe Plastic Drainage Pipe Shredder Application Areas:
Plastic drainage pipe shredder machine is used to shred UPVC drainage pipe, UPVC water supply pipe, aluminum-plastic composite pipe, polyethylene (PE) water supply pipe, polypropylene PPR hot water pipe, drainage pipe, exhaust and sewage sanitary pipe, underground drainage pipe system, rainwater pipe and wire installation supporting Threading tube, etc.

Industrial UPVC PPR Pipe Plastic Drainage Pipe Shredder Description:
Single shaft plastic drainage pipe shredder machine uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small size. It can be available for shredding a wide range of materials including plastic, wood, rubber, paper, etc. The cutter head consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on the single shaft. The fixed cutter is mounted at an angle adjacent to the rotary cutter to achieve better cutting. The material is grabbed between ‘V-shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reduction of noise are ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.

Single Shaft Shredder ‘V’ shaped blade:
single shaft shredder blade
Working principle:
The motor drives the shaft to make the knife rotates at high speed, the material is put between the knife shaft and the fixed knife, the materials are shredded, the qualified size will discharge from the screen mesh, and the oversize material will be sent back for re-shredding. The final product size can be adjusted by changing the final product size.

 

Industrial UPVC PPR Pipe Plastic Drainage Pipe Shredder Component:

Movable Feeding Hopper Heat treated rotor knives
Movable Feeding Hopper
Plastic pipes are travelling along with the movement of the hydraulic ram and thus are pushed closely to the cutting rotor for thorough and efficient shredding.
Heat treated rotor knives
Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design Wear Resistant Tungsten surface coating
V-cutting rotor design
with staggered cutter positioning
Wear Resistant
Tungsten surface coating for abrasive applications
Electric Control Cabinet plastic pipe shredder screen unit
Electric Control Cabinet
The whole model adopts frequency conversion control and conforms to international standards such as CE/CSA.
Replaceable screen at the outlet
For controlling the output granules below certain size. Size of the screen mesh can be customized according to your need
PLC control Hydraulic System
PLC Control
Making it easier for fault diagnosis and maintenance
Hydraulic System
The pressure and rate of flow can be adjusted according to different materials.

Industrial UPVC PPR Pipe Plastic Drainage Pipe Shredder Technical Features:
1. The shredder single shaft for plastic with a big feeding mouth, can put the big plastic or rubber product freely.
2. The rotary and cutting blade with edge of special design, can get very high efficiency and high capacity.
3. The shredder single shaft for plastic is controlled by PLC system; the blade can rotate in opposite direction and close automatically if something unexpected happens; with very high safety service.
4. The shredder single shaft for plastic runs slowly with low noise and is less dusty.
5. The blade material with special alloy steel is made, with long life.
6. All machinery and electrical devices are protected in accordance with the European CE standard.
7. Hydraulic system Pushes the material automatically to the shredding rotor while working. More efficient and can achieve a high capacity. According to material kind, can adjust the pushing speed to avoid overload.
8. Cooler system(optional) can maintain the temperature for continuous operation.

Related equipment:

 

Leave a Reply

Your email address will not be published. Required fields are marked *

single shaft shredder, plastic shredder, plastic pipe shredder, wood shredder, cable shredder

Model PNDS-600A PNDS-800A PNDS-1000A PNDS-1200A PNDS-1500A
Dimension L*W*H(mm) 2455×1478×1700 2825×1747×1875 2825×2004×1875 2825×2564×1875 2825×2964×1935
Cutting Chamber C/D(mm) 1200×600 1410×800 1410×1000 1410×1200 1410×1500
Main Powerkw) 15-22 30-45 37-55 55-90 75-132
Hydraulic Power(kw) 2,2 3 4 5.5 5.5
Shredding Diameter(mm) 320 400 400 400 480
Shredding Rotor Length(mm) 600 800 1000 1200 1500
Rotating&Fixing Blades QTY(psc) 32+2×2 38+2×2 58+2×2 95+2×3 110+2×3
End Plastic Scraps Size(mm) 30-50 30-50 30-50 30-50 30-50

Video

Products List