• Hydraulic Metal Chip Briquetting Machine

Hydraulic Metal Chip Briquetting Machine

Hydraulic metal chip briquetting machine can directly cold press powdery cast iron chips, steel chips, copper chips, aluminium chips, etc. into 3-6 kg cylindrical cake blocks for transportation and furnace casting. The whole process does not need to add temperature, additives or other processes. The density of cast iron chips after pressing can reach 5-6T/m3.

  • Product Description
  • Technical Parameters
  • Video

Application:

Hydraulic metal chip briquetting machine is suitable for aluminium alloy profile factory, steel casting factory, aluminium casting factory, copper casting factory to briquetting aluminium chips, steel chips, iron chips, copper chips back to the furnace, replacing the scrap steel, pig iron, aluminium ingot, copper scrap as raw materials, which can reduce the burning loss.

iron chips copper chips Aluminium chips
Iron Chips Copper Chips Aluminium chips

Description:

Hydraulic metal chip briquetting machine can directly cold press powdery cast iron chips, steel chips, copper chips, aluminium chips, etc. into 3-6 kg cylindrical cake blocks for transportation and furnace casting. The whole process does not need to add temperature, additives or other processes. The density of cast iron chips after pressing can reach 5-6T/m3.
Hydraulic metal chip briquetting machine can also adopt domestic or imported hydraulic and electric components according to customer’s requirements, with automatic feeding and weighing devices. Among them, 500 type metal chip briquetting hydraulic press is specially designed for copper material factory, the density of briquette can reach more than 7T/m³, which is the ideal product for pressing lead brass.

 

Advantages of  metal chip briquetting machine

Significant waste volume reduction of up to 90%
Minimized storage, handling and transportation costs
Recovery of expensive coolants, oil and emulsion
Better melting behavior compared to loose chips (less burning and oxide formation)
Higher yield in the melting process with a remelter or refiner
Low residual moisture, no centrifuge required for drying
Higher density of metal briquettes compared to loose chips

Leave a Reply

Your email address will not be published. Required fields are marked *

Model Nominal Force(kn) Capacity(T)  Motor(kw) Bale Size(mm)
150 1500 3-6 15 Φ80×60-80
200 2000 4-6 18.5 Φ80×60-80
250 2500 6-7 18.5 Φ90×70-100
315 3150 8-12 30 Φ90×80-100
360 3600 10-12 30 Φ90×70-100
400 4000 10-18 37 Φ120×70-130
500 5000 10-20 37 Φ130×70-130
630 6300 20-30 45 Φ150×100-120
800 8000 40-55 75+55 Φ150×140-180
1000 10000 55-65 55+37 Φ240×200-250
1250 12500 75-90 75+55 Φ240×200-250