• double shaft shredder, waste plastic shredder, twin shaft shredder, two shaft shredder,cable shredder, metal shredder

Waste Plastic Metal Tire Wood WEEE Cable Double Shaft Shredder Machine

Double shaft shredder machine can easily pre-crush:waste plastic, such as plastic sheets, plastic pipe, plastic film, plastic lump;Electronic waste;Metals(lead, aluminum, copper, cable, barrels, sheet scrap, sheet metal pieces left over from production processes);Aluminum cans;Wood(wooden pallets or fruit boxes);Plastic(plastic bottles or canisters);Waste tire, rubber;Paper waste (cardboard, newspaper, office paper, books, magazine, kraft paper, paper core, cardboard tube, paper packaging material);

  • Product Description
  • Technical Parameters
  • Video

Application Areas:
Double shaft shredder machine can easily pre-crush:waste plastic, such as plastic sheets, plastic pipe, plastic film, plastic lump;Electronic waste;Metals(lead, aluminum, copper, cable, barrels, sheet scrap, sheet metal pieces left over from production processes);Aluminum cans;Wood(wooden pallets or fruit boxes);Plastic(plastic bottles or canisters);Waste tire, rubber;Paper waste (cardboard, newspaper, office paper, books, magazine, kraft paper, paper core, cardboard tube, paper packaging material);

E-waste Shredder, Computer Boards Shredder, Cell phone Boards Shredder, TV Boards Shredder, Copper-clad Laminate Shredder
Description:
Double Shaft Shredder with loading hoppers, equipped with high quality cutters with low rotation speed for a lower energy consumption and noise reduction.;It incorporates two counter-rotating shafts that intermesh with each other (2 shafts with sharp elements constituted by sharp-corners disks provided with hooks; Every hook has the task to hook the product and drive-it by the action of the two counter-rotating shafts). The material is powerfully torn and shredded by the talons of the cuttings discs. Specially designed rotor makes the shredder be extremely wear resistant.
Double Shaft Shredder Blades:
Double Shaft Shredder Blades
Components:
Double Shaft Plastic buckets barrels tubs shredder
Technical Features:
1.Our shredders can be employed as either a primary or secondary shredder and can be seen working anywhere from the waste management company to biofuel producers;
2.Dual shafted, slow-speed, high-torque waste shredder with hardened steel cutters;
3.The two cutting rotors powerfully grab the feed material, and no matter the feed material is large piece of hard plastic or heavy tires, this machine can easily shred them into small pieces;
4.Double shaft shredder is able to process a number of different materials;shredder is designed with a powerful engine, long working length and aggressive input,Internal feeding volume bigger than traditional and common single shaft shredder machine and allow you using forklift truck to feed.
5.Heavy structure: the frame and structure of our shredders are made of high-thickness sheets and tubular. Blades are manufactured from high quality steel, suitable for shredding tough materials and for extra long life;
6.Depending on requirement, these discs (blades) are available in a wide range of quantities, qualities and shapes with the new double-shaft shredder;
7.Any overloads caused by foreign material are sensed by the PLC controller and cause the shaft rotation to stop and reverse direction to clear the foreign matter, and then resume;
8.Cutters removal and replacement can be carried out safely and simply.
9.Our shredders Use a planetary reducer, not a traditional gearbox, and the planetary gearbox has the following advantages:High Efficiency,Greater Stability,Compact Size,Higher Torque Density,Cost Effective Precision,High Radial Loads.

Specification Shredder Motor Power Shredding Chamber Size
PNSS-300 5.5 510×300
PNSS-400 7.5 510×400
PNSS-600 7.5+7.5 510×600
PNSS-800 11+11 600×800
PNSS-1000 18.5+18.5 800×1000
PNSS-1200 30+30/22+22 1000×1200
PNSS-1400 45+45 1400×1200
PNSS-1600 55+55 1600×1200
PNSS-1800 75+75 1800×1400
PNSS-2000 90+90 2000×1400

Video

Products List